Kepital FT 2020

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

<font face="Times New Roman"> </font>

A medium-low viscosity grade for general injection molding. It was reinforced with whisker,

and so suitable for parts requiring much higher stiffness, dimensional accuracy and low


Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,59
Physical Melt Flow Rate ISO 1133 g/10min 15
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 0,9
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 86
Mechanical Strain at Break 23˚C ISO 527-1,2 % 2,7
Mechanical Flexural Strength 23˚C ISO 178 MPa 146
Mechanical Flexural Modulus 23˚C ISO 178 MPa 6.800
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 3,6
Electrical Surface Resistivity IEC 60093 Ω 1 x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1 x 10^14