Kepital GR-30
Produkt anfragen Datenblatt herunterladen Telefonische Beratung +49 40 727702-0
<font face="Times New Roman"> </font>
A low viscosity grade for general injection molding. Suitable for use where wear resistance, low
noise and excellent dimensional stability are required when contacting metal and resin.
| Properties | Test condition | Method | Unit | Value | |
|---|---|---|---|---|---|
| Physical | Density | ISO 1183 | g/cm³ | 1,43 | |
| Physical | Melt Flow Rate | ISO 1133 | g/10min | 20 | |
| Physical | Molding Shrinkage (Flow Direction) | t 3mm, Ø 100mm | KEP Method | % | 1,8 |
| Thermal | Flammability | UL94 | Class | HB | |
| Mechanical | Tensile Strength | 23˚C | ISO 527-1,2 | MPa | 48 |
| Mechanical | Flexural Strength | 23˚C | ISO 178 | MPa | 66 |
| Mechanical | Flexural Modulus | 23˚C | ISO 178 | MPa | 2150 |
| Mechanical | Charpy Notched Impact Strength | ISO 179/1eA | kJ/m² | 5,5 | |
| Mechanical | Nominal Strain at Break | 23˚C | ISO 527-1,2 | % | 40 |
| Electrical | Surface Resistivity | IEC 60093 | Ω | 1 • 10^16 | |
| Electrical | Volume Resistivity | IEC 60093 | Ω • cm | 1 • 10^14 |