Kepital MF3025

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

<font face="Times New Roman"> </font>

An easy flowing grade for general injection molding. It was reinforced with milled glass fiber,

and so suitable for parts requiring low warpage than those of the FG grade by reinforcing

glass fiber.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,59
Physical Melt Flow Rate ISO 1133 g/10min 16
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 1,3
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 78
Mechanical Strain at Break 23˚C ISO 527-1,2 % 4,9
Mechanical Flexural Strength 23˚C ISO 178 MPa 129
Mechanical Flexural Modulus 23˚C ISO 178 MPa 5.530
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 3,8
Electrical Surface Resistivity IEC 60093 Ω 1x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1x 10^14