MAXIMID 7550GF/PA.MXD6

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

<font size="2" face="T3Font_1" color="#221f1f"><font size="2" face="T3Font_1" color="#221f1f"><font size="2" face="T3Font_1" color="#221f1f"> </font></font></font>

MAXIMID 7550GF is a glass fiber 50%-reinforced MXD6-PA grade.

It is suitable for automotive, electrical & electronics, and consumer parts.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,65
Physical Filler contents ISO 4351 % 50
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 0,2-0,3
Physical Water absorption 23°C, 50% RH ISO62 % 0,17
Thermal Melting Point DSC °C 238
Thermal Heat Deflection Temperature (HDT) 1,8MPa ISO75 °C 232
Thermal Flammability t=0,8mm UL94 Class HB
Thermal Coefficient of linear thermal expansion ISO 11359 10^-5/°C 1,7
Mechanical Tensile Strength ISO 527 MPa 295
Mechanical Strain at Break ISO 527 % 2,0
Mechanical Flexual Strength ISO 178 MPa 400
Mechanical Flexual Modulus ISO 178 MPa 18500
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 11,5
Electrical Surface Resistivity IEC 60093 Ω 3*10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 10^16
Electrical Dielectric Strength IEC 60243-1 kV /mm 18
Electrical Permittivity 100Hz IEC60250 4,5
Electrical Permittivity 1MHz IEC60250 4,7
Electrical Dissipation Factor 100Hz IEC60250 0,098
Electrical Dissipation Factor 1MHz IEC60250 0,024
Processing Pre-Drying 4 - 8 h Dehumidified Dryer (Suggested max. moisture 0,1%) °C 90-120
Processing Molding (Barrel) Temperature 3-zone screw °C 250-280
Processing Mold Temperature °C 120-140