Infino WX-7010

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

PropertiesTest conditionMethodUnitValue
PhysicalSpecific GravityNatural or Representative ColorISO 1183-1,16
PhysicalMold Shrinkage (MD)Flow at 3.2mm(MD)ISO 2577%0.5-0.6
PhysicalMold Shrinkage (TD)X-Flow at 3.2mm(TD)ISO 2577%0.5-0.6
PhysicalMelt Flow Index250°C, 2,16kgISO 1133g/10min3
PhysicalMelt Flow Index250°C,10kgISO 1133g/10min38
MechanicalTensile Strength at Yield50mm/minISO 527MPa56
MechanicalTensile Strain at Break50mm/minISO 527%66
MechanicalTensile Modulus50mm/minISO 527MPa1950
MechanicalTensile Strength at Break50mm/minISO 527MPa50
MechanicalFlexural Strength2mm/minISO 178MPa80
MechanicalFlexural Modulus2mm/minISO 178MPa2250
MechanicalIzod Impact Strength (notched)at 23°C, 4mmISO 180 1AKJ/m²50
MechanicalCharpy Impact Strength (V-notched)23°C, 4mmISO 179 1eAKJ/m²60
MechanicalRockwell HardnessR-scaleISO 2039-2-110
MechanicalIzod Impact Strength (notched)-30°C, 4mmISO 180 1AKJ/m²18,5
ThermalHeat Deflection Temperature (unannealed)1.8 MPa, 4.0mmISO 75-2°C101
ThermalHeat Deflection Temperature (unannealed)0.45 MPa, 4.0mmISO 75-2°C120
ThermalHeat Deflection Temperature (annealing)1.8 MPa, 4.0mmISO 75-2°C105
ThermalHeat Deflection Temperature (annealing)0.45 MPa, 4.0mmISO 75-2°C120
ThermalVicat Softening TemperatureB/50ISO R 306°C117
ThermalLinear Thermal CoefficientFlow at 40~100°CISO 11359-1/-2x10^-5 cm/cm/°C8
ThermalLinear Thermal CoefficientX-Flow at 40~100°CISO 11359-1/-2x10^-5 cm/cm/°C8,5