Kepital F10-02

Produkt anfragen Datenblatt herunterladen Telefonische Beratung +49 40 727702-0

A high viscosity grade for extrusion of round bars, sheets and tubes. It is also suitable for injection molding of thick-walled, void-free and sink mark reduced parts.

	Properties	Test condition	Method	Unit	Value
Physical	Density		ISO 1183	g/cm³	1,41
Physical	Melt Flow Rate		ISO 1133	g/10min	3
Physical	Molding Shrinkage (Flow Direction)	t 3mm, Ø 100mm	KEP Method	%	2,2
Thermal	Heat Deflection Temperature (HDT)	1.8 MPa	ISO 75-1,2	˚C	96
Thermal	Flammability		UL94	Class	HB
Mechanical	Tensile Strength	23˚C	ISO 527-1,2	MPa	63
Mechanical	Flexural Strength	23˚C	ISO 178	MPa	83
Mechanical	Flexural Modulus	23˚C	ISO 178	MPa	2.400
Mechanical	Charpy Notched Impact Strength		ISO 179/1eA	kJ/m²	7
Mechanical	Nominal Strain at Break	23˚C	ISO 527-1,2	%	40
Electrical	Surface Resistivity		IEC 60093	Ω	1 x 10^16
Electrical	Volume Resistivity		IEC 60093	Ω • cm	1 x 10^14
Electrical	Dielectric Strength		IEC 60243-1	kV /mm	19