Kepital FB2030
Produkt anfragen Datenblatt herunterladen Telefonische Beratung +49 40 727702-0
<font face="Times New Roman"> </font>
An easy-flowing grade for general injection molding. It was reinforced glass beads. and so suitable
for parts requiring low warpage and sinking phenomenon.
Properties | Test condition | Method | Unit | Value | |
---|---|---|---|---|---|
Physical | Density | ISO 1183 | g/cm³ | 1,64 | |
Physical | Melt Flow Rate | ISO 1133 | g/10min | 19 | |
Physical | Molding Shrinkage (Flow Direction) | t 3mm, Ø 100mm | KEP Method | % | 1,5 |
Thermal | Flammability | UL94 | Class | HB | |
Mechanical | Tensile Strength | 23˚C | ISO 527-1,2 | MPa | 58 |
Mechanical | Strain at Break | 23˚C | ISO 527-1,2 | % | 4 |
Mechanical | Flexural Strength | 23˚C | ISO 178 | MPa | 97 |
Mechanical | Flexural Modulus | 23˚C | ISO 178 | MPa | 4.050 |
Mechanical | Charpy Notched Impact Strength | ISO 179/1eA | kJ/m² | 2,5 | |
Electrical | Surface Resistivity | IEC 60093 | Ω | 1 x 10^16 | |
Electrical | Volume Resistivity | IEC 60093 | Ω • cm | 1 x 10^14 | |
Electrical | Dielectric Strength | IEC 60243-1 | kV /mm | 20 |