Kepital TC3010

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

<font face="Times New Roman"> </font>

A low viscosity grade for general injection molding. It was modified with talcum, and so

suitable for parts requiring more reducing deformation than that of standard grade under

stress and excellent dimensional accuracy.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,56
Physical Melt Flow Rate ISO 1133 g/10min 21
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 1,7
Thermal Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1,2 ˚C 125
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 67
Mechanical Strain at Break 23˚C ISO 527-1,2 % 5
Mechanical Flexural Strength 23˚C ISO 178 MPa 105
Mechanical Flexural Modulus 23˚C ISO 178 MPa 4.200
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 3,4
Electrical Surface Resistivity IEC 60093 Ω 1x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1x 10^14