Kepital TC3020

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

<font face="Times New Roman"> </font>

Talcum reinforced and low viscosity grade for general injection molding. It’s suitable for parts

requiring more reducing deformation than that of standard grade under the same stress. Exhibits

excellent dimensional accuracy.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,56
Physical Melt Flow Rate ISO 1133 g/10min 5
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 1,6
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 67
Mechanical Strain at Break 23˚C ISO 527-1,2 % 5,6
Mechanical Flexural Strength 23˚C ISO 178 MPa 112
Mechanical Flexural Modulus 23˚C ISO 178 MPa 5.290
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 3,8
Electrical Surface Resistivity IEC 60093 Ω 1x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1x 10^14
Electrical Dielectric Strength IEC 60243-1 kV /mm 21