Kepital TE-22S LOF

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0


<font size="3">A medium-hith viscosity grade improved on thermal stability, for general injection molding. It was modified </font><font size="3"></font>

Low odor grade improved on heat stability

with elastomer, and suitable for parts requiring a much higher impact resistance and toughness.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,38
Physical Melt Flow Rate ISO 1133 g/10min 3,5
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 53
Mechanical Flexural Strength 23˚C ISO 178 MPa 72
Mechanical Flexural Modulus 23˚C ISO 178 MPa 2.100
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 14
Mechanical Nominal Strain at Break 23˚C ISO 527-1,2 % 50
Mechanical Tensile Strain at Break 23˚C ISO 527-1,2 % 80
Electrical Surface Resistivity IEC 60093 Ω 1x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1x 10^14
Various Molding Shrinkage (Flow Direction) t 2mm, Ø 60mm % 1,8