Kepital TE-23S LOF
Produkt anfragen Datenblatt herunterladen Telefonische Beratung +49 40 727702-0
<font size="3">A medium-high viscosity grade improved on thermal stability, for general injection molding. It was modified </font><font size="3"></font> Low odor grade improved on heat stability with elastomer, and suitable for parts requiring a much higher impact resistance and toughness. |
Properties | Test condition | Method | Unit | Value | |
---|---|---|---|---|---|
Physical | Density | ISO 1183 | g/cm³ | 1,37 | |
Physical | Melt Flow Rate | ISO 1133 | g/10min | 2,5 | |
Thermal | Flammability | UL94 | Class | HB | |
Mechanical | Tensile Strength | 23˚C | ISO 527-1,2 | MPa | 47 |
Mechanical | Flexural Strength | 23˚C | ISO 178 | MPa | 60 |
Mechanical | Flexural Modulus | 23˚C | ISO 178 | MPa | 1.750 |
Mechanical | Charpy Notched Impact Strength | ISO 179/1eA | kJ/m² | 18 | |
Mechanical | Nominal Strain at Break | 23˚C | ISO 527-1,2 | % | 60 |
Mechanical | Tensile Strain at Break | 23˚C | ISO 527-1,2 | % | 100 |
Electrical | Surface Resistivity | IEC 60093 | Ω | 1x 10^16 | |
Electrical | Volume Resistivity | IEC 60093 | Ω • cm | 1x 10^14 | |
Various | Molding Shrinkage (Flow Direction) | t 2mm, Ø 60mm | % | 1,8 |