Kepital TE-25

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

A medium-high viscosity grade for general injection molding. It was modified with elastomer, and so suitable for parts requiring much higher impact resistance and toughness.

Properties Test condition Method Unit Value
Physical Density ISO 1183 g/cm³ 1,34
Physical Melt Flow Rate ISO 1133 g/10min 6
Physical Molding Shrinkage (Flow Direction) t 3mm, Ø 100mm KEP Method % 1,6
Thermal Flammability UL94 Class HB
Mechanical Tensile Strength 23˚C ISO 527-1,2 MPa 39
Mechanical Flexural Strength 23˚C ISO 178 MPa 46
Mechanical Flexural Modulus 23˚C ISO 178 MPa 1.250
Mechanical Charpy Notched Impact Strength ISO 179/1eA kJ/m² 21
Mechanical Nominal Strain at Break 23˚C ISO 527-1,2 % >60
Electrical Surface Resistivity IEC 60093 Ω 1x 10^16
Electrical Volume Resistivity IEC 60093 Ω • cm 1x 10^14
Electrical Dielectric Strength IEC 60243-1 kV /mm 21