Kepital WX-30 LOF BK
Produkt anfragen Datenblatt herunterladen Telefonische Beratung +49 40 727702-0
<font size="3">A friction and wear resistance grade for general injection molding </font><font size="3" face="Times New Roman,Times New Roman"><font size="3" face="Times New Roman,Times New Roman"></font></font> It is suitable for use requiring reduced wear noise and good friction & wear resistance Also, it is filled with mineral and so suitable for parts requiring dimensional stability |
| Properties | Test condition | Method | Unit | Value | |
|---|---|---|---|---|---|
| Physical | Density | ISO 1183 | g/cm³ | 1,52 | |
| Physical | Melt Flow Rate | ISO 1133 | g/10min | 18 | |
| Physical | Molding Shrinkage (Flow Direction) | t 3mm, Ø 100mm | KEP Method | % | 1,8 |
| Thermal | Flammability | UL94 | Class | HB | |
| Mechanical | Tensile Strength | 23˚C | ISO 527-1,2 | MPa | 42 |
| Mechanical | Flexural Strength | 23˚C | ISO 178 | MPa | 66 |
| Mechanical | Flexural Modulus | 23˚C | ISO 178 | MPa | 2300 |
| Mechanical | Charpy Notched Impact Strength | ISO 179/1eA | kJ/m² | 3,2 | |
| Mechanical | Nominal Strain at Break | 23˚C | ISO 527-1,2 | % | 12 |
| Electrical | Surface Resistivity | IEC 60093 | Ω | 1• 10^16 | |
| Electrical | Volume Resistivity | IEC 60093 | Ω • cm | 1• 10^14 | |
| Electrical | Dielectric Strength | IEC 60243-1 | kV /mm | 18 |