Niblend F17

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

PC-ABS alloy reinforced with 17% glass fibre, of high thermic resistance for the injection mouldibg

Of items needing high hardness and dimensional stability even at high temperatures.

PropertiesTest conditionMethodUnitValue
RheologicalMelt Flow Index260°C / 5 kgASTM D1238g/10min18
MechanicalTensile Stress at Break5 mm/minASTM D638MPa70
MechanicalFlexural Maximum Stress1,3 mm/minASTM D790MPa100
MechanicalFlexural Elastic Modulus1,3 mm/minASTM D790MPa5000
MechanicalIzod Notched Impact Strength-20°C/3mmASTM D256J/m50
MechanicalRockwell HardnessASTM D785R-scale118
MechanicalIzod Notched Impact Strength23°C/3,2 mmASTM D256J/m70
MechanicalElongation50 mm/minASTM D638%3
ThermalVicat Softening Temperature49N / 120°C/hASTM D 1525°C123
ThermalHeat Distortion Temperature H.D.T1.82 MPaASTM D648°C115
ThermalCoef. Dilatazione Termica Lineare23/55 °CISO 11359-210^-5 K^-14
Flame BehaviourGlow Wire Temperature (G.W.T)S=2.0 mmIEC 695-2-1°C650
Flame BehaviourUL 94 RatingS=1.6 mmUL 94classHB
Flame BehaviourUL 94 RatingS=3.2 mmUL 94classHB
ElectricalDielectric StrengthS=1 mmIEC 60243-1KV/mm25
ElectricalRelative Permettivity1 Mhz = seccoIEC 60250-2,9
ElectricalDissipation Factor1 Mhz = seccoIEC 60250-0,05
ElectricalSurface ResistivityseccoIEC 60093Ω10^15
ElectricalVolume ResistivityseccoIEC 60093Ω • cm10^15
PhysicalDensity23°CASTM D792g/cm³1,23
VariousHumidity Content at Equilibrium23°C / 50 % U.R.ISO 62%0,2
VariousMoulding Shrinkageparallel-%0,4 – 0,8