Niplene T20/C E

Produkt anfragen   Datenblatt herunterladen    Telefonische Beratung +49 40 727702-0

- Polypropylene copolymer, filled with 20 % of talcum for extrusion of sheets and profiles and for

extrusion blow moulding.

- Grade characterized by very low MFI and good balance impact/stiffness.

PropertiesTest conditionMethodUnitValue
RheologicalMelt Flow Index230 °C / 2,16 KgASTM D1238g/10min1,5
MechanicalFlexural Maximum Stress1,3 mm/minASTM D790MPa37
MechanicalFlexural Elastic Modulus1,3 mm/minASTM D790MPa2100
MechanicalIzod Notched Impact Strength23°C/3mmASTM D256J/m150
MechanicalRockwell HardnessASTM D785R-scale101
MechanicalElongation5mm/minASTM D638%>40
MechanicalTensile Modulus5 mm/minASTM D638MPa2750
MechanicalTensile Stress at Yield5 mm/minASTM D638MPa23
ThermalVicat Softening Temperature49N / 120°C/hASTM D 1525°C85
ThermalHeat Distortion Temperature H.D.T1.82 MPaASTM D648°C70
ThermalHeat Distortion Temperature H.D.T0,455 MPaASTM D648°C118
Flame BehaviourGlow Wire Temperature (G.W.T)S=2.0 mmIEC 695-2-1°C650
Flame BehaviourUL 94 RatingS=1.6 mmUL 94classHB
Flame BehaviourUL 94 RatingS=3.2 mmUL 94classHB
ElectricalRelative Permettivity1 Mhz – dryIEC 60250-2,7
ElectricalDissipation Factor1 Mhz – dryIEC 60250-0,001
ElectricalDielectric StrengthS=1 mmIEC 60243-1KV/mm60
ElectricalSurface ResistivitydryIEC 60093Ω10^14
ElectricalVolume ResistivitydryIEC 60093Ω • cm10^15
VariousDensityASTM D792g/cm³1,05